MMO Coated Tubular string / Single string/ Multi string for horizontal installation and vertical installation to protect the pipeline. Tiaano supplying along with accessories of the tubular string like. Centralizer, braided vose, nylon rope, centralizer, EPDM rubber bush, copper flat, crimping tool etc. so that they can buy MMO Coated tube from us and crimp from the customer place to reduce the transportation of cables.

Tiaano manufacturing and supply of MMO & Platinum plated Titanium and Niobium anodes for Impressed Current Cathodic Protection (ICCP).  According to the customer’s requirement we manufacture the anodes from copper cored titanium and copper cored niobium too.   Our anodes are gone through the accreditation test by M/s. TWT, London as per NACE standard TMO 294-200.  Our MMO coated / Platinized anodes are specified as…

1. Made from seamless Titanium tubes:  Single or multi string anodes, Cantilever and probe anodes, Civil probe or discrete tube anodes, Liner loop tube anodes, Tube anodes.

2. Made from titanium / niobium or their copper cored rods: Cantilever anodes, Heater probe anodes, Canister anodes, Suspended rod anodes, Rod anodes.

3. Made from titanium and niobium wires: Canister anodes, Expanded spring anodes, Anode flex, Piggy back anodes, Linear loop anodes, Wire anodes.

4. Made from Titanium and Niobium sheets:  Strip canister anodes, Strip anodes, Elliptical anodes, Disc anodes, Solid ribbon anodes, Pyramid anodes, Conductor bar.

5. Made from Titanium expanded metal mesh: Mesh canister anodes, Ribbon mesh anodes, Discreate anodes, Star gard anodes, Anode mesh.

6. Reference electrodes from MMO coated titanium rods and zinc cast rods.

Our recent supply of MMO Coated Cantilever for the gigantic pump internal protection.

PLATINIZED ANODE FOR IMPRESSED CURRENT CATHODIC PROTECTION
These impressed current anodes are also known as dimensionally stable anode or insoluble anodes. Platinum is an excellent anode material due to its high conductivity and low consumption rate will extent for many years. Due to its high cost, it is not economical to use platinum by itself. Platinized anodes are produced by electroplating a thin layer of platinum over a lower cost substrate such as titanium, tantalum, niobium or zirconium etc.

Platinised Niobium wire Anode

Tiaano supplying Platinised Rubberized Titanium/Niobium Disc Anode and MMO Coated Titanium disc anode for the protection of hull protection.

 MMO Coated ribbon anode and conductor bar for gigantic tank bottom protection. The output of the ICCP system should be optimized to provide enough current to provide protection to the target structure. Some cathodic protection transformer-rectifier units are designed with taps on the transformer windings and jumper terminals to select the voltage output of the ICCP system. Cathodic protection transformer-rectifier units for water tanks and used in other applications are made with solid state circuits to automatically adjust the operating voltage to maintain the optimum current output or structure-to-electrolyte potential. For shore structures and other large complex target structures, ICCP systems are often designed with multiple independent zones of anodes with separate cathodic protection transformer-rectifier circuits.

MMO Coated cantilever/disc anode are used to protect the gigantic pump internals, pipe line internal and condenser box where the sea water/ oil pass through in it. These anodes are used to protect the cathode what we have given negative from erosion and corrosion with DC power supply called as impressed current cathodic protection (ICCP)

We, Tiaano supplying various types of cantilever/disc anodes with MMO coating as well as platinized coating as per the customer requirement.

Our recent supply to Spain:

Cathodic protection is most innovative technique to protect the corrosion of active metal surfaces. Cathodic protection is used all over the globe to protect pipelines, big concrete structures, water treatment plants, above and underwater storage tanks, ship and boat hulls, offshore production platforms, reinforcement bars in concrete structures and jetties and piers.

There are two types of cathodic protections one is impressed current cathodic protection cathodic anodes and number two is depressed current cathodic protection.

In depressed current cathodic protection system, the anode which is used to protect the structure will be sacrificial. Its life is too short not more than two years. But in impressed current cathodic protection system, the anode which will be connected to the DC power is act as a barrier to protect the structure.

Tiaano manufacturing and supplying ICCP anodes over 63 countries.

Our recent supply the spares of MMO coated rod and MMO coated fasteners to protect the pipe line structure.

FRP INSULATED  MMO COATED STRIP for cathodic protection

Normally all are used Galvanic anodes (depressed current cathodic protection)for the jetty pile protection which will act as a sacrificial , have to replace the anodes at regular intervals.  There is a best alternate source to protect the jetty piles is an impressed current design utilizing MMO coated or PLATINUM plated anode sleds was evaluated is a best alternate source  which protect more than 30 years of design life. MMO coated anodes consist of an iridium oxide catalyst and a mixture of other rare earth oxides coated onto a titanium substrate. These dimensionally stable, catalytic anodes have exceptionally low consumption rates measured in mg/A-y, provide outstanding chemical resistance, and are stable in a wide range of applications. Originally developed for use in seawater hydrolysis applications, MMO anodes are ideal for use in seawater CP service.

We the Tianno supplying PLATINISED (OR) MMO COATED FRP INSULATED STRIP ANODE and strip in difference dimensions, depends upon the customer’s requirement.

We regularly supplying strip for the MMO COATED FRP INSULATED STRIP ANODE for our USA client.

MMO COATED RUBBERISED DISC.

Corrosion causes structures like ships, boats and submarine to weaken the structure. This may result in leakages and unsafe working conditions. Instead of trying to fix these issues after the fact you can focus on avoiding corrosion before it happens with protection methods, such as ICCP. It is very costly to retrofit or rework the big ships and also waste of time and stop the business activity.

Avoiding corrosion in a harsh ocean environment often requires the use of cathodic protection methods. These usability is different tools, such as sacrificial anodes or impressed currents, to help maritime-based industries stay afloat.

Impressed current cathodic protection is the best way compared to sacrificial anode.

We can install MMO coated disc in the hull by passing DC current by a rectifier which will protect the ships life longer nearly 20 to 25 years depends upon the usage of the ship which afloat often.

MMO Coated disc size will be customized depends upon the design of the CP system.

We can monitor the ICCP system activity by reference electrode.

Tiaano manufacturing Platinum as well as MMO Coated Disc. 

Our recent supply to Indian Navy through our regular customer:

MMO COATED PIGGY PACK FOR CATHODIC PROTECTION

Piggy pack anodes are used to protect the tank bottoms. It’s the easiest method of cathodic protection which may not need a weld at site and also easy to handle and install.

Piggy pack wire anodes connected with cable by the way of Crimping and sealing with mastic and heat shrink sleeve procedure. Tiaano have the in house facility to crimp the anodes in LIDA and CPCC connection.

The piggy pack anodes are inserted in the jacket with coke fill to sustain the conductivity of the anodes in the place where we install for cathodic protection.